Coating Systems

High Chemical Resistance Epoxy Flooring Systems

HCR Epoxy Flooring systems are an extremely hard wearing and durable long-term flooring solution. These systems have an excellent resistance to sulphuric acid and other industrial chemicals along with a long history of successful application both in Australia and abroad.

Proflek Coating’s epoxy is 100% solids, solvent-free and are designed, formulated & manufactured in Brisbane for Australia’s harsh environments and high standards. These systems can be applied with a slip-resistant medium where required ensuring OHS regulations are compliant.

Proflek Coatings Epoxy Systems are often used in food and beverage manufacturing facilities where sugars, juice, and fats can have an adverse effect on concrete floors. Wastewater and sewage treatment plants and where there is a high use of industrial chemicals in use are also common areas and facilities where Proflek HCR applications are installed.


Epoxy Flooring

Proflek Coatings epoxies are solvent-free (also known as 100% SOLIDS or 0% VOC). Meeting and exceeding in many cases all APAS and Australian standards and requirements.

Epoxy coatings are used because of their outstanding chemical resistance, durability, low porosity, high impact strength and strong bond strength. Ideal for a wide cross-section of industries across the board from residential, commercial, industrial and mining. Areas of application would include warehouses, factories, food manufacturing, correctional centres, hospitals, education facilities.

 


Cold Rooms – Freezers

Proflek Coatings offer a number of long-term flooring and wall solutions that are durable, food safe, impervious to liquids and handle environments where moisture is a constant. Slip Resistant additives can be added to ensure Australian OHS Standards are met. Falls to wastes can be formed and installed ensuring water and other fluids track correctly to the waste.

Epoxy coatings are used because of their outstanding chemical resistance, durability, low porosity and strong bond strength. Ideal for commercial kitchens, cold rooms, dry stores, freezers and blast freezers.

 


Safety Lines & Epoxy Flooring

Proflek Coating’s diverse range of Safety Flooring options. Working closely with the client to assess the rating required for the area, the cleaning regimes in place and the vision of the client are all met. Working on more than just the general floor areas Proflek Coatings can install, hatching, eye wash areas, forklift paths, pedestrian paths and crossings and exclusion zones.

 

 

 


2-4mm Epoxy Matrix System

Designed for use in a wide range of commercial & industrial environments where a long lasting, slip resistant flooring solution is required.

Epoxy Matrix Systems have an exceptional resistance to a wide variety of chemical spillage and fumes makes this system ideal for use in high traffic areas such as commercial kitchens, heavy industrial and workshops. Typically installed at a 2-4mm DFT.

Providing an Epoxy System that has a proven track record in harsh environments.

 


Epoxy Mortar Coving

Epoxy Mortar Coving in food preparation, commercial kitchens and amenities are a requirement of most council’s specifications. Epoxy Mortar Coving has a higher impact strength than concrete coving. At approximately 64MPA Epoxy Mortar Coving resists chipping, cracking and maintains its integrity when put under pressure.

Epoxy Mortar Coving can be installed in a range of radius with the coating ending at the top of the coving or continuing further up the wall resulting in a seamless transition between the floor and wall joint.

Alternatively, Aluminium Arrow Head Coving can be installed, this is most common in cold rooms and freezers where sandwich panel has been installed.

Combining the Epoxy Mortar with the coating systems ensures a great compatibility between the two systems.


Flake Coat

Proflek Coatings 5 coat Seamless Flake System installed as a hard wearing, long lasting decorative finish commonly installed in residential garages, entertainment, driveways, commercial offices, amenities and around swimming pools.

Proflek Coatings Flake system can be utilized both inside and outside and finished either as a smooth, textured or anti-slip finish. Giving an easy to clean, long-term alternative to tiling, paving paint and other short-term options.

Based on a 5 coat system starting with an Epoxy base and finished with a UV resistant Urethane.

This system has been installed by Proflek Coatings in 1,000’s of residential and commercial applications over the last 2 decades.


Metallic Epoxy

Metallic epoxy floor coatings are a relatively new trend that is very contemporary.

These coatings create a glossy and deep looking floor with a variety of different metallic colours and visual effects. Some even create a beautiful three-dimensional appearance that gives the illusion of craters, ripples, and swirling rivers of metallic looking plasma.

Used in both residential and commercial applications, this system is a great high-end alternative to carpet and tiles.


Grind & Seal 

Grind and Seal is an alternative to the traditional polished concrete system. Using a Diamond Grinder to expose the existing stone and then applying a topical coating to seal the floor.

A number of options are available for coatings depending on the desired finish required by the customer. This would include using Epoxy and Urethanes. Each product will give a variation in the finished application from a glass finish with depth to a satin finish keeping the natural colour of the substrate or a combination of both.

This system ensures a fully sealed and impervious, easy to clean finish that offers a decorative long-term flooring solution and alternative to the traditional polished system or carpet and tiles.

Slip-resistant mediums can be used if required.


 

Online Enquiries

Where did you find us?: