Plain Epoxy
Experience. Quality. Reliability!
Two pack high solids, polyamide cured epoxy resin, designed as a finishing coat of high chemical and wear resistance, is ideal for use in commercial, industrial and marine environments.
 |
Plain Coat Epoxies can be tinted in a wide range of colours. Why not colour co-ordinate your floor using your company colours.
Glass, sand or ceramic can be added to the coating to alter
the surface grip.
Apples are not always apples!
-
In recent times Epoxy Systems have been compared to Polyaspartic Polyurea Systems.
Polyurea Systems may be applied quicker than an Epoxy System but there is no comparison in the finished product. The quick cure products cure so quickly that in our opinion they don't penetrate as deep into the substrate as an epoxy that cures more slowly does.
Some advantages of Epoxy are better adhesion, higher scuff / chemical resistance and better longevity of the coating. Polyurea base coats typically are applied at 130-150 micron, our epoxy typically is applied at 300 micron per coat meaning more product on the floor giving longevity to the coating.
Polyaspartic Polyurea is at this stage unproven over time in Australian conditions whereas Epoxy systems have been proven over decades of applications and use. Epoxy systems have been used successfully for many years on floors such as trucking facilities, airplane hangers, commercial kitchens and residential applications.
Don’t be fooled by the quick installation, a good long lasting floor takes time to install.
If you would like to compare the finished coatings please contact us and we can arrange a time for you to view samples of both products.
It will be an easy decision from there.Proflek Flake Coat Epoxy :
- Diamond grind, repair holes and cracks
- Apply two roll coats of Epoxy
- Apply one Flake Coat / Refer to website for colour selections
- Apply two roll coats of Urethane ( final coat is UV Stable and therefore protects the under coats from ageing or yellowing)
Polyaspartic Polyurea Coating :
- Acid Wash
- Apply 1 roll coat of Tinted Polyaspartic Polyurea
- Apply one Flake Coat to the above coat
- Apply one clear top coat of Polyaspartic Polurea
ake sure when comparing quotations you are comparing:
- Preparation ( Diamond Grinding or Acid Washing, does price include repair to concrete. )
- Type of products being used
- Number of coats being applied
- Is the final coat UV Stable and been tested over time in Australian climate
- Is your installer licensed? – QBSA requires all jobs valued at over $3,300 to be installed by a licensed applicator, Proflek Coatings is licensed to install Epoxy Flooring and Waterproofing.
